Alternative design selection 150 kv transmission line holtekam – angkasa papua using mcdm topsis method
Keywords:
TOPSIS, OHL, UGC, Submarine, MCDMAbstract
The Indonesian government's electricity company (PLN) has got Project Development Unit (UIP), which oversees the development of Electricity Infrastructure. In UIP Maluku Papua, the engineering consultant is hired to study the three alternative designs using available data. Based on the experience of the study process, the decision tends to the criteria for a faster construction time or a cheaper cost estimate. Meanwhile, the cheapest cost is not always the final solution because UIP has many experiences constructing SUTT in the Papua area. Many problems arise, resulting in design changes during construction and other social problems that can occur as inhibiting factors and delays. In addition, if the other alternatives directly implemented using SKTT and SKLTT, which generally estimated to be done faster in construction, also there's no one can guarantee it because this alternative is categorized as a new thing in Maluku & Papua, where there's a lot of uncertainty factor in implementation will also be immeasurable. Based on these things, empirical research using the TOPSIS method is needed to analyze the most appropriate alternative design decisions. The result of the research is SUTT as the recommended decision. But considering the sensitivity analysis, the weight of the preference factor has a significant role in changing the decision, so if it's deemed necessary, this can be developed in the next comprehensive research.
Downloads
References
Aigboviosa, A. P., Idiake, U. S., Nkordeh, N., Ehimen, A. A., & Victory, K. (2018). Development of Electrical Power Generation System Through the Use of Speed Breaker. Proceedings of the International Conference on Industrial Engineering and Operations Management, (pp. 347-351). Washington DC,.
Bhole, G. P., & Deshmukh, T. (2018). Multi-Criteria Decision Making (MCDM) Methods and its applications. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 6(V), 899-915.
BICEN, Y. (2019). The Future Perspectives of Overhead and Underground Transmission Lines in Turkey. 3rd International Engineering Research Symposium INERS’19.
Chetty, L., & Ijumba, N. (2012). Rural electrification using overhead HVDC transmission lines. Journal of Energy in Southern Africa, 23(2), 56-64.
Fahad, J. Q., & Chillab, R. K. (2020). Design aspects of high voltage transmission line. Bulletin of Electrical Engineering and Informatics, 9(3), 853~861.
Garg, A., & Ghatak, A. (2020). An Empirical Study on Power Evacuation Projects’ Performance: A Strategic Layout in the Indian Context. Asia-Pacific Journal of Management Research and Innovation, 16(1), 31–42.
Haraguchi, M., Miyano, H., & Nakamura, T. (2021). Power generation and society. Fundamentals of Thermal and Nuclear Power Generation(JSME Series in Thermal and Nuclear Power Generation), 227-274.
Ibraheem, S. M. (2020). Power Supply. Journal of Electrical Engineering.
Jayapriya, T., Monica, E. M., Nathiya, N., A. P., & Sowmiya, T. (2017). Uninterrupted Power Supply to The Society in Variable Resources with High Efficiency. International Journal of Engineering Research & Technology (IJERT), 5(13).
Kementerian Energi dan Sumber Daya Mineral Republik Indonesia. (2021). Rencana Usaha Penyediaan Tenaga Listrik (RUPTL) 2021-2030 PT PLN. Jakarta: Kementerian Energi dan Sumber Daya Mineral Republik Indonesia.
Masanja, N. M. (2020). Practical Guide to Writing a Feasibility Study. Mwanza, Tanzania: NMM Printers.
Nawaz, M. S., & Khan, I. (2016). Design and Construction of 33/11 KV Line & Substation. International Research Journal of Engineering and Technology (IRJET), 3(7), 722-727.
Nirwan, S., Shah, V., Shah, P., & Velani, K. (2018). Design and Analysis of Power Evacuation System for Solar Power-Plant. Journal of Emerging Technologies and Innovative Research (JETIR) 445, 5(11), 445-450.
Nkalo, U. K., & Agwu, E. O. (2019). Review of the Impact of Electricity Supply on Economic Growth: A Nigerian Case Study. IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE), 14(1), 28-34.
O.Nyumba, T., Wilson, K., Derrick, C. J., & Mukherjee, N. (2018). The focus group discussion methodology: Insights from two decades of application in conservation. Methods in Ecology and Evolution, 9, 20-32.
Parida, P. K. (2019). A General View of TOPSIS Method Involving Multi-Attribute Decision Making Problems. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9(2), 3205-3214.
Piana, E. A., Bignucolo, F., Donini, A., & Spezie, R. (2018). Maintenance of a High-Voltage Overhead Transmission Line: Sustainability and Noise Impact Assessment. Sustainability, 10(491).
Ponto, J. (2015). Understanding and Evaluating Survey Research. J Adv Pract Oncol, 6, 168-171.
Public Service Commission of Wisconsin. (2016). Underground Electric Transmission Lines. Wisconsin.
Puget Sound Energy. (2014). Underground transmission lines fact sheet. Puget Sound Energy.
Setayeshgar, A. (2016). Principles of Mechanical Design in Overhead Transmission Lines. Aalto University.
Sontakke, S., & Sakhale, C. N. (2021). A Short Review on Various Types of Transmission Tower Structure and Its Design. International Journal of Innovations in Engineering and Science, 6(9), 9-13.
Umeda, S., Ishii, N., Horiguchi, N., Maeda, M., Yamaguchi, T., Tanaka, H., et al. (2007). Underground Power Cable, Distribution Cable, Overhead Transmission Line, Industrial Cable and Their Accessories. Furukawa Electric Industrial Cable.
Unni, N. S., & Soumya, A. (2016). Transmission Line Characteristics. IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), 67-77.
Zohuri, B., & P. McDaniel. (2019). The Electricity: An Essential Necessity in Our Life. Advanced Smaller Modular Reactors, pp. 1-21.
Zulqarnain, R. M., Saeed, M., Ahmad, N., Dayan, F., & Ahmad, B. (2020). Application of TOPSIS Method for Decision Making. International Journal of Scientific Research in Mathematical and Statistical Sciences, 7(2), 76-81.
